WCAG Navigation
Home |
Search
Search
Search results for "production"
141-150 of a total 259 hits found.
System solutions for cold forging
joint presses are suitable both for mass production of small com-po nents as well as for production of shafts in large qua-nti ties. State-of-the-art control systems allow for easy integration of the presses into fully automated man-u facturing systems. The large number of features and additional functions of bed and slide ejectors, feed, transfer and die change allow optimization of the systems ... last changed on: 24.07.2018
Search similar pages
Maximum efficiency - Retrofit with Schuler transfer systems
due to active vibration dampening (AVD) Phase 1 Phase 2 Phase 3 ONE-STOP SOLUTION Potential Analysis Consulting Process optimizing Solution Planning Offer Investment release Project preparation Project release Implementation Production support Help desk Service Spare parts Consulting + Planning Engineering + Production Assembly + Launch Training Service ... last changed on: 14.02.2025
Search similar pages
Stamping
Stamping involves the production of recesses and markings in a piece of sheet metal. Field of application (examples): ribbing in body parts addition of mark of origin ... last changed on: 28.03.2014
Search similar pages
Efficient electric motors with Backlack
unwinding the raw material to the finished rotor and stator stack which feature improved magnetic properties and therefore also an improved efficiency. The production process always starts with stamping the electrical sheets. High-speed presses with progressive dies are used here for mass production. For electric car motors, sheets with a thickness of just 0.2 to 0.35 mm are increasingly being used to ... last changed on: 10.09.2024
Search similar pages
Forging Hammers
for the installation of extremely large dies. The high tup stroke, which is the same for the lower and upper tups, enables the production of extremely tall forgings. The working capacity remains essentially the same for the various die heights. Unique to this established design is the use of protruding dies, whereby the depth of the upper and lower tups is the same. Therefore, extremely long as well ... last changed on: 24.05.2017
Search similar pages
Plunging
Plunging is the production of a ring-shaped shroud by tracing a pre-pierced opening. Field of application (examples): fastening holes cable guides in body parts Die: plunging punch in a progressive die ... last changed on: 28.03.2014
Search similar pages
Schuler ECOFORM - Sustainable forming solutions
consumption in presses and automation devices, at the same time as achieving sustainable, economical successes? Sustainability and energy efficiency are the main trends of our world: t hey are changing our society and revolutionizing the economy. Schuler offers specific answers to these global challenges – and by doing so gives you the opportunity to design your plant and production facilities optimally for ... last changed on: 30.01.2015
Search similar pages
Blank cutting
Blank cutting involves the complete separation of any shapes along a closed line. Field of application (examples): blanks with cut-out sections reworking of drawn parts production of form sheets Die: cutting die ... last changed on: 28.03.2014
Search similar pages
Hydraulic presses for forging aluminum wheels (MH series) - Technology
Range of application production of aluminum wheels Press force 5.000 - 100.000 kN Drive hydraulic Material feeding robots Part transfer robots ... last changed on: 19.04.2010
Search similar pages
Separating
Separating refers to the complete separation of the sheet metal section from the semi-finished product. Example: Blank production. Field of application: coil strip sheet metal strip sheet metal plate Die: cutting die shears ... last changed on: 28.03.2014
Search similar pages
Provider
Schuler AGMarketing
Bahnhofstr. 41
D-73033 Göppingen
Telefon: +49 (71 61) 66-0
Fax: +49 (71 61) 66-233
E-mail: pr@schulergroup.com
Quick Links
Schuler worldwide
