Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "speed"

    102050 per page
    Sort by date relevance
    11-20 of a total 106 hits found.

    Modular electronic Tri-axis transfers
    MODULAR ELECTRONIC TRI-AXIS TRANSFER Our Active Vibration Dampening (AVD) system guarantees reliable part transfer for all three transfer solutions – even at high speeds and under full load. Schuler Pro Trans. With its three levels of automation, “L” (Light), “M” (Medium) and “H” (Heavy), the Schuler Pro Trans line covers light, medium and heavy part weights and stroke rates. The heavy version is ... last changed on: 01.07.2019 Search similar pages
    Hydraulic Tryout Presses
    required number of die sets. To keep the start-up costs of new die sets as low as possible it is important to bring the dies up to speed for volume production quickly and efficiently. Schuler tryout systems are custom-tailored to meet this requirement. The equipment and the expertise of your engineers ensure an optimal die start-up. Short start-up times for new dies. In the modern stamping plant, tryout ... last changed on: 05.11.2021 Search similar pages
    Press hardening with PCH flex - Fast, flexible, cost-effective
    With a controlled drive and conventional standard components, this line is a solid introduction to production with hot stamping. The system can be equipped robots or feeders for a production speed of 4.5 strokes per minute with up to four blanks. Engineered for the Asian market. The StrongLine is the ideal entry level solution for low initial production quantities. Roller hearth furnace Marking Hot ... last changed on: 21.10.2024 Search similar pages
    Stamping and forming systems | Special applications
    STAMPING AND FORMING SYSTEMS SPECIAL APPLICATIONS 3 TABLE OF CONTENTS / STAMPING AND FORMING SYSTEMS 4 6 8 10 12 14 HIGH-SPEED STAMPING PRESSES MCF HIGH-SPEED STAMPING PRESSES BMK AND EMKH PRESSES FOR ALUMINUM FORMING PALP/AZ RADIATOR PRESSES RMK PRESSES FOR EMBOSSING AND CALIBRATING EMK SCHULER SERVICE TABLE OF CONTENT SPECIAL APPLICATIONS 4 MCF HIGH-SPEED STAMPING PRESS High-speed stamping ... last changed on: 24.10.2022 Search similar pages
    Forging with ServoDirect Technology
    technology means that the former frequency- controlled 3-phase motor with constant speed is replaced by flexible torque servomotors. The machines do not have a flywheel, and there is no clutch and brake either. The main advantage of servo drive technology is that the slide kinematics are freely programmable. At the same time, higher productivity levels are possible compared to co-n ventional presses. The ... last changed on: 30.01.2015 Search similar pages
    Seven steps to success: mechanical transfer presses.
    The 25,000 kN mechanical transfer press is also prepared to meet a wide range of manufacturing requirements and at speeds of up to 25 strokes per minute. Small and medium-sized outer skin and structural parts can be produced in seven stations with a transport pitch of 900 mm. Stations 1 to 6 are equipped with pneumatic bed cushions for improved control of the drawing process as well as with ... last changed on: 04.10.2011 Search similar pages
    Modular Electronic Tri-axis Transfers
    The new modular transfer generation from Schuler is a high-performance adjunct for presses used in sheet metal forming. Designed in three basic sizes, this transfer system covers a wide range of applications. All three transfers owe their significantly improved transfer rates to the new automation using direct-drive feeding with high-speed servo drives. Schuler Pro Trans With its three levels of ... last changed on: 28.03.2019 Search similar pages
    Powerful. Economical. Efficient hydraulic forming.
    characteristics of drives, making it p-os sible to use the shortest pauses without losing time. Your advantages: ‚ Lower energy requirement ‚ Less reactive power is created ‚ Reduction in noise levels ‚ Reduction in cooling power ‚ Reduction in oil tank sizes ANCILLARY DRIVES WITH SPEED CONTROL The innovative solution to an old problem. Depending on the status of the system, the ancillary functions are s-up ... last changed on: 21.10.2024 Search similar pages
    Technology
    Coil weight 45 t Coil outer diameter 1,300 - 2,200 mm Coil inner diameter 720 - 800 mm Coil width 1,000 - 2,050 mm Coil thickness 6 - 25,4 mm Coil unwinding speed 0.3 - 6.0 m/min. Plasma cutter speed 0.1 - 3.9 m/min. Other dimensions possible on request. ... last changed on: 04.04.2014 Search similar pages
    Coil feeding system Feedmax®
    The Feedmax, a high-speed coil feed with precise servodrive, plays a very important role in keeping the entire system of Coil Line - Feed Unit - Press with Dies operating at the highest performance level. The Feedmax was especially developed for high-performance transport in high-speed blanking lines. Its range of application, however, also includes universal presses and transfer ... last changed on: 20.01.2023 Search similar pages
    Page« Back12345678910Forward »