Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "production"

    102050 per page
    Sort by date relevance
    81-90 of a total 260 hits found.

    Rosso Steel invests in laser blanking line from Schuler
    m/min. The laser blanking line also has two laser cutting heads, each with a rated output of 4 kW, and operates at a maximum cutting speed of 100 m/min.  Blanking lines with lasers are particularly suitable for production processes with frequent product changes. The system can be used to produce both outer skin blanks and structural parts in high product quality. It is precisely these ... last changed on: 17.09.2024 Search similar pages
    Powerful. Economical. Efficient hydraulic forming.
    while still complying with the safety requirements. Your advantages: ‚ Lower energy requirement ‚ Use of standard hydraulic oils (HLP46) ‚ Reduction in oil wear ‚ Lower cooling power ‚ Reduction in pressure peaks ‚ Reduction in hydraulic components ENERGY RECUPERATION The energy stored in the system is not left untapped, but is returned efficiently to the production process. We have -de veloped a ... last changed on: 21.10.2024 Search similar pages
    Mechanical forging presses with eccentric drive
    forging Schuler mechanical multi-station presses with eccentric drive are primarily used in warm forging. High production flexibility, fast response times and efficiency in the production of standard parts are becoming increasingly important. With the systems engineering of Schuler this is possible – and even more. The press series MME/MSE was optimized in terms of set-up times and net performance and ... last changed on: 12.11.2015 Search similar pages
    Mechanical multi-station presses - Technology
    Range of applications production of precision parts in the multi-station forming process Press capacities 2,500 to 60,000 kN Drive eccentric drive or Hipro* Slides preferred with external blanking slide Material feeding coil line or destacker/blankloader Part transfer Tri-axis transfer Production rate 20 – 80 strokes per minute * Hipro: link drive ... last changed on: 03.07.2009 Search similar pages
    Performance data in the stamping plant
    One basis for planning of new stamping plants involves the answers to the following questions:  What production rate do we need to achieve?  Which equipment components are required to achieve this goal and how is the material flow to take place? The graphics below should provide a quick overview to these considerations: Material flow – performance data – press capacity – production Coil ... last changed on: 02.10.2009 Search similar pages
    Power Line coil feeding lines
    POWER LINE COIL FEEDING LINES Power Line coil feeding lines are well suited to supporting highly dynamic production processes. POWER LINE COIL FEEDING LINES. FOR HIGHLY DYNAMIC PRODUCTION PROCESSES. Schuler’s Power Line coil feeding lines have been specially developed to meet the needs of customers in the supplier sector. The product range comprises various high-performance basic models of our ... last changed on: 01.07.2019 Search similar pages
    Modular electronic Tri-axis transfers
    Trans. With the Schuler Power Trans and automation level “S” (Speed), Schuler offers a high-end transfer solution for high-performance presses. It can increase production rates to even higher levels, up to 30 percent more than can be achieved with the Pro Trans automation versions. This increased performance is achieved specifically by means of newly developed carbon- fiber rails with the ... last changed on: 01.07.2019 Search similar pages
    Ring Rolling Lines for the manufacturing of seamless rings
    Schuler, such as double-sided pre- punching, enable the production of an optimal fiber structure. Systems for hot forging The advantages of the Schuler ring rolling line are as follows: ‚ The position of the upper mandrel bearing and thus the length of the roller mandrels can be adjusted to the geometry of the ring, resulting in a significantly reduced bending and die load. ‚ The roller mandrel's ... last changed on: 24.10.2022 Search similar pages
    Schuler BPL Flex
    SCHULER BPL FLEX. PRODUCTION LINES FOR LARGE FORMAT ALKALINE ELECTROLYZER BIPOLAR PLATES. 612EN-092022-cross Copyright by Schuler Model SH 4500-2.3x2.3* Output rate of embossed plates per year up to 1.2 million Material feed Manual or automatic Table length/width [mm] 2.300 x 2.300 Type of press Hydraulic Press force [kN] 45.000 Max. slide stroke [mm] 650 Die shut height (incl. pads) [mm] Min ... last changed on: 21.10.2024 Search similar pages
    Crossbar Robot 4.0 - Connect for success!
    compatibility with Crossbar Feeder ‚ Complete solution including destacker and end-of-line ‚ Can be used as destacker and unloader ‚ Single, double and four-fold parts production possible ‚ Suitable for steel and aluminum ‚ One set of tooling per opening ‚ Rapid automatic tooling change ‚ Ease of maintenance due to free access to the gap between the presses FEATURES AND TECHNICAL DATA. THE CROSSBAR ROBOT 4.0 ... last changed on: 20.03.2019 Search similar pages
    Page« Back45678910111213Forward »