Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "presses"

    102050 per page
    Sort by date relevance
    161-170 of a total 303 hits found.

    Crossbar Robot 4.0 - Connect for success!
    CROSSBAR ROBOT 4.0 CONNECT FOR SUCCESS! ENORMOUS MOVEMENT RADIUS: PRESS SPACING FROM 4.5 TO 10 METERS. Direct part transport. The Crossbar Robot 4.0 operates on the basis of its six standard axes, supplemented by a movement axis and a swivel axis. This means it can transport parts from one station to the next within a press line, with a high degree of movement flexibility. It removes up to four ... last changed on: 20.03.2019 Search similar pages
    Linear hammer in forging
    stroking hammers were previously driven either hydraulically or pneumatically. Current requirements in modern forging can no longer be met by using these conventional technologies. Schuler’s years of experience in presses driven by servo motors have now enabled the direct drive to also be successfully used in the hammer. The linear drive patented by Schuler features a linear motor at the heart of the ... last changed on: 01.06.2016 Search similar pages
    Systems for the manufacture of electric motor laminations
    Sy Stem S for the manufacture of electric motor lamination S economic production. t he whole range for cutting circular blank S and S tator S. Variety of electric motor laminations, made on Schuler equipment. liNES ‚ Smartline SA with a press force of 1,250 nkto 5,000 kn ‚ Bed clamping plate rom 850 mm × 1,800 mm to 1,450 mm × 3,300 mm ‚ Stroking range from 80 – 1,000 min -1 HiGHSPeeD BlAnkin G ... last changed on: 02.04.2024 Search similar pages
    Mass production of prismatic battery cell cases
    MASS PRODUCTION OF PRISMATIC BATTERY CELL CASES 1 + 2 Slug lubrication and infeed ‚ Standard slugs available worldwide ‚ All material fed into press → no web grid, no scrap ‚ Orientation of slugs → consistent slug feed ‚ Shaped slug for economic utilisation possible 3 IE Press ‚ Transforms slugs into prismatic alu cases ‚ One stroke operation → minimum tool equipment needed ‚ Hundreds of machines ... last changed on: 16.10.2024 Search similar pages
    Notchers
    Schuler offers a full lineup of machines for single-notch production: hand-operated 80 kN and 200 kN notchers, fully-automated lines with circular- and linear-transfer automation, and segment notching presses. ... last changed on: 15.03.2023 Search similar pages
    Tryout centers
    Schuler tryout centers provide ahigh degree of flexibility for die manufacturing facilities and stamping plants. The centers include various mechanical or hydraulic types of presses, die turnover devices and rotating blsters. Inside, time-intensive manual re-work on dies takes place. Interface between components is provided by moving bolsters on a system of rails. ... last changed on: 28.03.2014 Search similar pages
    Hybrid press lines
    Hybrid press lines consist of a hydraulic lead press and mechanical follow-up presses. They are a cost-effective alternative when single-action and double-action dies will be used on the same line. Thanks to Schuler’s advanced hydraulic drive technology, the production rate of the hybrid line is within the range of mechanical press lines. ... last changed on: 15.06.2015 Search similar pages
    Die lubrication and cooling device
    In warm and hot forging presses, effective cooling and lubrication systems are required. These solutions can provide optimum lubrication placement. In addition, the duration of the cooling and lubrication process can be optimized. This is an advantage compared to other systems such as linear manipulators, swivelling systems or systems that are mounted on transfer rails. ... last changed on: 28.03.2014 Search similar pages
    Fittings / Industrial
    As early as the 1980's, Schuler designed and delivered the first hydroform production presses for steel and copper fittings. Today, Schuler hydrofoming lines are used to manufacture fittings in sizes as small as a few millimeters (heating and plumbing applications) to large fittings up to 600 mm in diameter (chemical and petroleum industries). Hydrofom parts are also used in industrial ... last changed on: 08.10.2009 Search similar pages
    Basic principles of sheet metal forming
    Forming technology" is a term which covers the extremely wide range of chipless forming production processes which are possible when presses are used. Interested Internet users will find the basic principles and processes of forming technology in general form here. Our information concept has been deliberately simplified to provide an insight into the press and process sequences without the need ... last changed on: 14.10.2014 Search similar pages
    Page« Back12131415161718192021Forward »