Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "hydraulic"

    102050 per page
    Sort by date relevance
    61-70 of a total 123 hits found.

    Linear hammer in forging
    by the non-contact, zero-maintenance linear drive, which directly converts electrical energy into the mechanical movement of the tup, average energy savings of up to 25% can be achieved in comparison to hydraulic hammers. Linear hammer with ServoDirect technology. Less is more: If you want to optimize your profit, you need to reduce your energy consumption. This is why Schuler offers EcoForm, a ... last changed on: 01.06.2016 Search similar pages
    Composites Presses
    Fiber-reinforced plastics offer a great deal of scope for design, as well as considerable functions with minimum component weight. Use the potential of modern plastics and rely on economical solutions for series production of fiber-reinforced components – with fully-automated hydraulic press systems and production expertise from Schuler. Our hydraulic press systems are suitable for series ... last changed on: 29.10.2015 Search similar pages
    Counterblow hammers (Bêché HG and DG series) - Technology
    Range of application large and oversized forged parts Stroke per ram hammer up to 1.225 mm Work energy 160 - 1.400 kJ Drive HG series with hydraulic drive; DG series with pneumatic drive Max. blow rate 25 - 50 bpm Material feeding manual; robots ... last changed on: 19.04.2010 Search similar pages
    Aerospace - System solutions for the aerospace industry
    Wide range of parts ‚ High repeat accuracy ‚ High operational reliability ‚ Variable-speed drive ‚ Maximum efficiency ‚ High flexibility ‚ High dimensional accuracy SYSTEM SOLUTIONS FOR THE AEROSPACE INDUSTRY / AEROSPACE 14 HYDRAULIC CLOSED-DIE FORGING PRESSES. Hydraulic forging presses and lines are characterized by their high flexibility. The ability to program strokes, forces and speeds, combined ... last changed on: 21.10.2024 Search similar pages
    Composites Presses - Technology
    Our hydraulic press systems are suitable for series production of: SMC (Sheet Moulding Compound) components GMT (Glass Mat Thermoplastics) components RTM (Resin Transfer Moulding) components Different systems are used, depending on the component requirements and the production process. Hydraulic presses for fiber-reinforced plastics - technical data Press force [kN] 12.500 16.000 21.000 ... last changed on: 20.02.2014 Search similar pages
    Practical solutions: Transfer presses for support components
    drive in conjunction with a fully hydraulic drawing unit will guarantee an optimal drawing operation. The Schuler 4,500-ton, tri-axis transfer press is optimized for the manufacture of support and structural components in high-strength and ultra-high-strength steels. A separate slide with 2,000 ton press force and a relatively small clamping surface of 1,400 x 2,500 mm permits a drawing process ... last changed on: 15.12.2015 Search similar pages
    Mass production of metal bipolar plates for fuel cells
    MASS PRODUCTION OF METAL BIPOLAR PLATES FOR FUEL CELLS. USING FORMING SYSTEMS AND DIE TECHNOLOGY FROM SCHULER. BPL 50 bipolar plate line with two-sided material feeding. 610EN-042024-cross Copyright by Schuler Model BPL 50 BPL 25 BPL flex Press type knuckle-joint press with servo or flywheel drive knuckle-joint press with servo or flywheel drive hydraulic press Material feed two-sided one-sided ... last changed on: 16.10.2024 Search similar pages
    Schuler ECOFORM - Sustainable forming solutions
    AcTIcAl e XAMPles OF ec OFOr M. s aving up to 60 % by ehf (efficient hydraulic f orming) compared to conventional hydraulic presses in sheet metal forming and forging. automatic in all processes, in any operating mode. s aving 50 % in servo press lines of the latest generation compared to conventional mechanical high-speed press lines by Schuler Smart Dc grid, speed-controlled drive systems with energy ... last changed on: 30.01.2015 Search similar pages
    Electric motor laminations blanking lines
    The slide runs play- free with 8-way roller guides and positive locking to the hardened guide rails of the press frame. The hydraulicall-cy ontrolled ejector system is located in the slide. The pressure pins can be directly controlled using dynamic cams to consistently eject the blanks from the top die. The slide counterba - lance and the hydraulic overload protection, combined with automatic re ... last changed on: 02.04.2024 Search similar pages
    Aluminum slug production lines
    bronze bushings. This unique combination makes a significant contribution toward achieving maximum precision and long die service lives. Roller rails in front of the bolster plate and rollers that can be raised and lowered in the bolster plate ensure that dies can be quickly and reliably moved in and out of the press. Hydraulic clamping -ele ments provide reliable locking of the dies on the press bed ... last changed on: 15.03.2023 Search similar pages
    Page« Back234567891011Forward »