Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "presses"

    102050 per page
    Sort by date relevance
    261-270 of a total 303 hits found.

    History of ANDRITZ Schuler Incorporated
    Formation of Joint Venture Schuler-Leukart in Columbus, Ohio 1984 Reorganization as Schuler Incorporated 1998 Chrysler Gold Pentastar Award Winner 2000 GM Supplier of the Year Award Winner 2001 Opening of Schuler US Headquarters in Canton, Michigan 2004 Installation of the first Compact Crossbar press in the USA 2007 Integration of Müller Weingarten Corporation 2008 Installation of the first ... last changed on: 23.06.2025 Search similar pages
    Mass production of metal bipolar plates for fuel cells
    MASS PRODUCTION OF METAL BIPOLAR PLATES FOR FUEL CELLS. USING FORMING SYSTEMS AND DIE TECHNOLOGY FROM SCHULER. BPL 50 bipolar plate line with two-sided material feeding. 610EN-042024-cross Copyright by Schuler Model BPL 50 BPL 25 BPL flex Press type knuckle-joint press with servo or flywheel drive knuckle-joint press with servo or flywheel drive hydraulic press Material feed two-sided one-sided ... last changed on: 16.10.2024 Search similar pages
    Basic principles of high-strength steels forming
    Prompted by the increased use of aluminum, the steel industry in recent year has developed higher and higher strength steels with more or less good forming properties. ... last changed on: 29.10.2015 Search similar pages
    Executive Board
    the Executive Board of ANDRITZ AG, Graz, Austria Friedrich Papst Former Member of the Executive Board of ANDRITZ AG, Graz, Austria Tobias Bauer 1) Programmer ANDRITZ AWEBA GmbH , Aue, Germany Holger Fuchs 1) Head of Service Market Segment Automotive ANDRITZ Schuler Pressen GmbH, Göppingen Pascal Holz 1) Trade Union Secretary IG Metall, Göppingen-Geislingen Office Udo Welker 1 ... last changed on: 28.04.2025 Search similar pages
    Executive Board
    the Executive Board of ANDRITZ AG, Graz, Austria Friedrich Papst Former Member of the Executive Board of ANDRITZ AG, Graz, Austria Tobias Bauer 1) Programmer ANDRITZ AWEBA GmbH , Aue, Germany Holger Fuchs 1) Head of Service Market Segment Automotive ANDRITZ Schuler Pressen GmbH, Göppingen Pascal Holz 1) Trade Union Secretary IG Metall, Göppingen-Geislingen Office Udo Welker 1 ... last changed on: 28.04.2025 Search similar pages
    Large series production of metallic bipolar plates for fuel cell
    Schuler servo-driven knuckle-joint press and Soutec laser welding technology As a manufacturer of cutting-edge technology in all areas of forming, Schuler offers lines for the large series production of metallic bipolar plates for fuel cells. The servo-driven knuckle-joint press based on the TRITON series for the BPL 25 and BPL 50 variants has been specially adapted to the requirements for the ... last changed on: 02.02.2024 Search similar pages
    Crossbar Robot 4.0 - Connect for success!
    The Crossbar Robot 4.0 combines proven robot technology with the advantages of Schuler Crossbar technology. This application uses a actual six-axes industrial robot, expanded by one feed axis and the Schuler tooling carrier provides a second axis. The horizontal motion takes place along the x-axis that is mounted on the press uprights. Programming is done at the operator’s panel for the ... last changed on: 22.02.2018 Search similar pages
    Hot-formed steels
    The so-called press hardening method is used for reinforcement parts to achieve extremely high strength. In this process, a conventional boron steel is heated to about 880 to 950° C (1620 to 1740º F), formed hot and then cooled, i.e. hardened, in the die. The hardening process is performed in the die to minimize any warping of the component. Unhardened boron steels demonstrate a tensile ... last changed on: 28.03.2014 Search similar pages
    Automation solutions for forging
    From the individual press, to forging hammers, through to the complete press line: As a system supplier, we automate your forming systems in an intelligent, yet practical manner. Our automation solutions are perfectly tailored to the temperature ranges of cold, warm, and hot forging. This allows you to increase the capacity of your production lines in an efficient and cost-effective way. The ... last changed on: 27.04.2015 Search similar pages
    Servo TechCenter Erfurt l Germany - Technology
    strong>Press 1 (mechanical) Press force [kN] 11,000 Clamping area [mm] 5,000 × 2,200 Shut height between bolster plate and slide min. / max. [mm] 900 – 1,250 Coil feed height min. / max. [mm] 350 – 750 Stroke height min. / max. programmable [mm] 750 fest Coil width min. / max. [mm] 200 – 1,550 Coil weight max. [kN] 15,000 Coil inner diameter min. / max. [mm] 480 – 520   ... last changed on: 15.03.2016 Search similar pages
    Page« Back22232425262728293031Forward »