Part spectrum/families in the stamping plant
The part spectrum to be manufactured plays an important role in the planning of a new stamping plant, since, among other things, the part spectrum largely determines the required press capacities. The range from small parts to large body panel or doubles is extremely large. A very close analysis of the part spectrum/part family is a basic requirement for successful stamping plant planning.
Part spectrum
Classification |
Capacity |
Typical part family |
Small |
3,150 - 12,500 kN |
Reinforcements, supports, hinges, recessed grips |
Medium |
16,000 - 25,000 kN |
Door sills, hinge reinforcements, B-pillars, side members, roof frames, recesses for tanks |
Large |
30,000 - 45,000 kN |
Fenders, hoods, deck lids, door inners, outer door skin |
Super Large |
50,000 - 90,000 kN |
Roofs, roof frames, side apertures, floor pans, outer door skin (double) |