Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "press"

    102050 per page
    Sort by date relevance
    231-240 of a total 310 hits found.

    Die turnover devices
    When enviromentally-friendly rework must be performed on the upper die during tryout phase, it should be rotated 180'. Responding to this, Schuler has developed die turnover devices for opening the dies and rotating the upper die. The devices are connected to tryout presses by moving bolsters. They simplify and speed-up the handling of dies that subsequently may be turned over tot the production ... last changed on: 28.03.2014 Search similar pages
    Systems for the manufacture of electric motor laminations
    Sy Stem S for the manufacture of electric motor lamination S economic production. t he whole range for cutting circular blank S and S tator S. Variety of electric motor laminations, made on Schuler equipment. liNES ‚ Smartline SA with a press force of 1,250 nkto 5,000 kn ‚ Bed clamping plate rom 850 mm × 1,800 mm to 1,450 mm × 3,300 mm ‚ Stroking range from 80 – 1,000 min -1 HiGHSPeeD BlAnkin G ... last changed on: 02.04.2024 Search similar pages
    Forging with ServoDirect Technology
    Forging with ServoDirect technology Fa St, with high-perFormance an D re Duce D Strain on D ie S. p re SSeS with ServoDirect technology. Automated presses have been used in forging since the 1960s with various drive concepts. Presses with Serv-o Direct technology have been used successfully for several years in sheet metalforming. Now this technology is also being used in forging. ServoDirect ... last changed on: 30.01.2015 Search similar pages
    Crossbar Robot 4.0 - Connect for success!
    The Crossbar Robot 4.0 combines proven robot technology with the advantages of Schuler Crossbar technology. This application uses a actual six-axes industrial robot, expanded by one feed axis and the Schuler tooling carrier provides a second axis. The horizontal motion takes place along the x-axis that is mounted on the press uprights. Programming is done at the operator’s panel for the ... last changed on: 22.02.2018 Search similar pages
    Executive Board
    the Executive Board of ANDRITZ AG, Graz, Austria Friedrich Papst Former Member of the Executive Board of ANDRITZ AG, Graz, Austria Tobias Bauer 1) Programmer ANDRITZ AWEBA GmbH , Aue, Germany Holger Fuchs 1) Head of Service Market Segment Automotive ANDRITZ Schuler Pressen GmbH, Göppingen Pascal Holz 1) Trade Union Secretary IG Metall, Göppingen-Geislingen Office Udo Welker 1 ... last changed on: 28.04.2025 Search similar pages
    Executive Board
    the Executive Board of ANDRITZ AG, Graz, Austria Friedrich Papst Former Member of the Executive Board of ANDRITZ AG, Graz, Austria Tobias Bauer 1) Programmer ANDRITZ AWEBA GmbH , Aue, Germany Holger Fuchs 1) Head of Service Market Segment Automotive ANDRITZ Schuler Pressen GmbH, Göppingen Pascal Holz 1) Trade Union Secretary IG Metall, Göppingen-Geislingen Office Udo Welker 1 ... last changed on: 28.04.2025 Search similar pages
    Full spectrum hydroforming from Schuler
    of the hydroforming process, significantly strengthening their competitive position. Hydroforming is one of Schuler’s key manufacturing technologies to s-up port lightweight vehicle designs. SCHULER SYSTEM EXPERTISE – COMPETITIVE ADVANTAGES FROM THE IDEA THROUGH TO SERIES PRODUCTION. More than 110 presses in the market. Schuler possesses proven expertise in hydroforming, and can look back on ... last changed on: 21.10.2024 Search similar pages
    Large series production of metallic bipolar plates for fuel cell
    Schuler servo-driven knuckle-joint press and Soutec laser welding technology As a manufacturer of cutting-edge technology in all areas of forming, Schuler offers lines for the large series production of metallic bipolar plates for fuel cells. The servo-driven knuckle-joint press based on the TRITON series for the BPL 25 and BPL 50 variants has been specially adapted to the requirements for the ... last changed on: 02.02.2024 Search similar pages
    Ring Rolling Lines for the manufacturing of seamless rings
    Robust machine design and large bearings as well as the use of proven Schuler technology in the field of drive and control technology ensure high availability of the system. 3 TURN-KEY SYSTEMS FOR THE MANUFACTURING OF RINGS / RING ROLLING LINE Hydraulic press for forging ring blanks (MH-3000). Manufacturing of flat and tall rings on the same ring rolling line. 1 Loading manipulator 2 Rotary hearth ... last changed on: 24.10.2022 Search similar pages
    SMARTLINE - The evolution in electrical sheet manufacuring - Technology
    Extract of technical data of high-speed blanking presses; SMARTLINE Series: SMARTLINE Series Press force / nominal force [kN / US tons] Size of bolsterplate  width [mm / in] Size of bolsterplate length [mm] Shut height with slide down, adjustment up and quicklift down  [mm / in] Stroke range  [min -1 ] SA-125S-1,8 1.250 / 140 850 / 33,5 1.800 / 70,9 400 / 15,7 ... last changed on: 30.09.2021 Search similar pages
    Page« Back19202122232425262728Forward »