Suche

Hot-formed steels

The so-called press hardening method is used for reinforcement parts to achieve extremely high strength. In this process, a conventional boron steel is heated to about 880 to 950° C (1620 to 1740º F), formed hot and then cooled, i.e. hardened, in the die. The hardening process is performed in the die to minimize any warping of the component. Unhardened boron steels demonstrate a tensile ... last changed on: 28.03.2014

Screw presses with direct drive

three-phase synchronous motors with rapid permitted switching frequencies were available; the door was open to a new and ideal drive system for screw presses. In this direct drive, the torque from the drive motor is transmitted to the screw without intermediate drive components, wear parts or energy losses. This drive concept represents the optimum design solution for a screw press drive – in terms of ... last changed on: 30.01.2015

Servo Eccentric Press MSE

for demanding challenges. Thus, the user can enjoy the benefits such as cost re-duc tion, improved output and significant amount of flexibility. QUICK, POWERFUL AND GENTLE ON TOOLS. ECCENTRIC PRESSES WITH SERVO DIRECT TECHNOLOGY. MSE2-2000-2.4-630. 3 SERVO ECCENTRIC PRESS MSE High production speed Optimal quality Wide parts spectrum Minimal pressure contact times Prolonged idle times for ... last changed on: 27.10.2017

Part spectrum/families in the stamping plant

The part spectrum to be manufactured plays an important role in the planning of a new stamping plant, since, among other things, the part spectrum largely determines the required press capacities. The range from small parts to large body panel or doubles is extremely large. A very close analysis of the part spectrum/part family is a basic requirement for successful stamping plant ... last changed on: 24.07.2009

Achieving maximum quality together

When customers require larger forgings, there is no way around a larger machine. This was one of the reasons why RN Gupta & Co LTD, a family-run company from India, ordered a new type DG 63h Bêché counterblow hammer from Schuler. The supplier with its 1,500 employees will use the hammer to produce flanges, pipe fittings, and valves for the oil and gas industry, as well as parts ... last changed on: 05.09.2024

Hydraulic press systems for fiber-reinforced plastics

modules into highly automated production lines. We provide consulting services along the entire value chain. It is possible thanks to our technical expertise about materials for lightweight construction and multi material mix, which for example will allow production of stable and lighter hybrid parts made of steel with fiber-reinforced plastics. In addition, our specialists also provide consulting for ... last changed on: 21.10.2024

Maximum efficiency - Retrofit with Schuler transfer systems

competitiveness Compliance with legal regulations Improved energy efficiency Reliable supply of spare parts Smart modernization with Schuler transfer systems: Fast availability Simple and low-cost performance boost Can be retrofitted to any press at any time Plenty of space for adding material feeding or unloading components Easily adaptable to a wide variety of applications Minimal vibration ... last changed on: 14.02.2025

The entire world of forging at a glance

including die solutions and die change systems from one source. To determine the best economic solution to produce quality parts, development of the forging process begins with part design, and must simultaneously consider material selection, process technology, production stages and die processes. Process development Feed and transport path analysis Die solutions Automation systems Die change ... last changed on: 24.10.2022

Compact Line modular coil feeding lines - For coil strip widths from 300 to 800 mm

reliable, cost-optimized system solutions. Your advantages: Significant cost savings thanks to pre-defined basic designs and options Top-grade components ensure quality, performance and reliability Configurable for manufacturing structural parts and outer skin panels Simple operating concept Comprehensive services available around the world AUTOMATION FROM SCHULER COMPACT LINE MODULAR COIL ... last changed on: 01.07.2019

Job description: OEM Sales Manager – OEM Sales Team

JOB TITLE: OEM Sales Manager – OEM Sales Team SUMMARY OF FUNCTIONS: Leads sales and product management efforts to assigned Automotive Key Accounts, including new equipment, service, rebuilds, upgrades, retrofits and parts. Supports all SIC/BCN product lines by maintaining thorough product knowledge in order to support the sales process. Leads the selling process for all SIC/BCN products by ... last changed on: 08.09.2021

Suggestions for your search:

Search

Search results for "parts"

Provider

Quick Links

Schuler worldwide

Overviews

This page ...

Social Networks