Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "parts"

    102050 per page
    Sort by date relevance
    41-50 of a total 272 hits found.

    Tryout Systems
    and represent a secure return on investment. ‚ Simulation of production conditions for mechanical and servo presses ‚ Increases availability during production ‚ Lowers parts costs per stroke ‚ The die data can be transferred to the production plant ‚ Provision of all operating modes in the press plant ‚ Energy efficiency thanks to servo drive ‚ Maximum flexibility thanks to servo drive THE ... last changed on: 18.10.2024 Search similar pages
    Mechanical calibrating/sizing presses FMK
    Because of the close tolerances required, powder metal parts must be machined after forming.  In many cases time-consuming machining rework is required.  With the Schuler knuckle-joint sizing presses FMK high-quality powder metal parts can be calibrated to ready-to-install precision components. These FMK powder metal sizing presses are available in press capacities of 2,500 to 15,000 kN. ... last changed on: 01.07.2015 Search similar pages
    Blank washers and lubrication units
    To ensure the best possible quality for outer skins and structural parts, a blank washing unit is used in front of the forming process to remove dirt and deposits. The subsequent homogenous lubrication of blanks rounds out this ideal pre-processing procedure. The constant cleaning action and the defined residual oil amount prevent downtimes and reduce costs for downstream operations. Blank ... last changed on: 15.06.2015 Search similar pages
    AWEBA tools move the world
    OUR TOOLS MOVE THE WORLD 23 OUR TOOLS MOVE THE WORLD WILLKOMMEN BEI AWEBA WELCOME TO AWEBA AWEBA im Herzen des Erzgebirges AWEBA situated in the heart of the Erzgebirge mountains The AWEBA group , part of the Schuler AG, is among the largest and most advanced European die-making companies. We offer inno-va tive solutions – not only in the realm of product development and die and fixture ... last changed on: 10.04.2019 Search similar pages
    Real-time responsiveness
    The OEE (Overall Equipment Efficiency) is an extremely important system-based metric. It provides information about the changes from actual to target values in the areas of availability, performance and quality. The OEE is equal to 100 percent when the system produces nothing but acceptable parts at the full programmed stroke rate over the entire time of production. Any disruptions or errors ... last changed on: 21.04.2020 Search similar pages
    Lightweight Technologies from Schuler
    and is therefore suited to different installation areas of the car. Lightweight technologies from Schuler. We are the only manufacturer in the world to offer press systems for all manufacturing processes in the area of this demanding technology: Cold forming of high-strength steels, pressure- controlled hardening, hydroforming, plastic forming and aluminum forming. In close cooperation with our part ... last changed on: 21.10.2024 Search similar pages
    Ceer and Schuler Partner for Building the Most Advanced Press Shop in MENA
    this groundbreaking project. This installation marks Schuler’s first press shop where the logistics are completely automated – from transportation of the blanks to the press line to the automatic stacking of the finished parts. We are proud to contribute our expertise and technology to Ceer and the Kingdom of Saudi Arabia.” This landmark partnership with Schuler marks a crucial ... last changed on: 18.12.2024 Search similar pages
    Knuckle-joint presses - Technology
    Range of application production of blanked and formed parts for the automotive industry and its suppliers Bed dimensions (l x w) 1,500 x 1,000 mm to 3,660 x 1,500 mm, depending on model Press capacity 2,000 kN, 2,500 kN, 3,150 kN, 4,000 kN, 5,000 kN, 6,300 kN, 8,000 kN, 10,000 kN Drive mechanical drive with modified modified knuckle-joint system Material feeding from coil with a roll feed line ... last changed on: 15.04.2014 Search similar pages
    Press requirements
    An adjustable hydraulic drawing cushion with pre-acceleration is a must for the deep drawing of difficult parts on mechanical presses. Often, it is assumed (by mistake) that only hydraulic presses are suitable for stamping aluminum parts.  It is true that the majority of pneumatic and hydraulic drawing cushions in mechanical presses can't produce a cleanly-defined, reproducible ... last changed on: 28.03.2014 Search similar pages
    Hydraulic transfer presses
    These presses are equipped with a large opening in the uprights, enabling flexible stamping of parts using transfer dies.  High output is achieved via efficient hydraulics, such as Schuler's ring valve technology or our multi-mode switching of hydraulic cylinders. Press forces range from 560 to 3550 tons, either for single or multiple-slide ... last changed on: 28.03.2014 Search similar pages
    Page« Back12345678910Forward »