Suggestions for your search:

    • Please enter a search term.

    Our most recent searches:

    Home Search

    Search

    Search results for "manufacturing"

    102050 per page
    Sort by date relevance
    41-50 of a total 115 hits found.

    Mechanical press lines with Crossbar Feeder automation - Technology
    Range of application High-volume manufacturing of auto body components Bed dimensions 3,00 x 1,70 m - 5,00 x 2,80 m Capacity 6.300 - 25.000 kN Drive Link drive Material feed Destacker/blankloader with centering station.  Blank washer and lubrication unit available as required. Part transfer Crossbar Feeder ... last changed on: 18.08.2009 Search similar pages
    Tryout centers
    Schuler tryout centers provide ahigh degree of flexibility for die manufacturing facilities and stamping plants. The centers include various mechanical or hydraulic types of presses, die turnover devices and rotating blsters. Inside, time-intensive manual re-work on dies takes place. Interface between components is provided by moving bolsters on a system of rails. ... last changed on: 28.03.2014 Search similar pages
    Hydraulic presses
    Hydraulic presses for the household appliance industry offer a wide spectrum of application possibilities thanks to their extreme felxibility and versatility. Pre-engineered press configurations in conjunction with a wide variety of modular automation options and die change techniques permit customer-specific manufacturing solutions. The equipment and lines are also noted for the high degree of ... last changed on: 01.04.2014 Search similar pages
    Hydraulic press lines - flexible stamping - Technology
    Range of application flexible high-volume manufacturing of auto body components Bed dimensions (l x w) 2.80 x 1.60 m - 5.40 x 2.50 m Total capacity 16,000 (with 4 presses) – 100,000 kN (with 6 presses) Drive hydraulic Material feeding blankloader, if required with blank washer, lubrication unit, and centering station Parts transfer robots, feeders, linear transfer, or crossbar robots ... last changed on: 03.07.2009 Search similar pages
    Stamping presses
    Stamping presses are standard machines with an extensive range of basic equipment for stamping classic sheet metal parts off the coil. In the range from 1,250 to 5,000 kN, they represent a cost-effective solution for manufacturing components at a high production rate. The CCS press control is especially simple to operate and offers interface points for the integration of auxiliary equipment. ... last changed on: 28.02.2017 Search similar pages
    Service
    Service is an integral part of what we offer our customers - we are on site, worldwide. We make a considerable effort to optimize the uptime and productivity of the manufacturing lines we supply -- before, during, and after start-up. Schuler Service includes: Replacement parts On site service and maintenance Remote service Rebuilds and modernization Cycle time optimization General OEE ... last changed on: 18.09.2018 Search similar pages
    Servo presses in monoblock design - Technology
    Range of application manufacturing of stamped or formed parts for a wide range of industries Bed dimensions (l x w) 2,000 x 1,100 mm to 4,000 x 1,800 mm, depending on press model Press capacities 2,500 kN, 4,000 kN, 6.300 kN, 8,000 kN Drive eccentric drive with highly dynamic torque motors Material feeding with coil feeding line or blankloader Part transfer progressive or transfer production ... last changed on: 15.04.2014 Search similar pages
    Basic principles of high-strength steels forming
    however, only possible if several areas of responsibility (such as engineering, manufacturing, material development, etc.) work together. ... last changed on: 29.10.2015 Search similar pages
    Counterblow hammers (Bêché HG and DG series)
    BÊCHÉ counterblow hammers are predominantly used for manufacturing large and ultra-large forgings. The high impact energy and tonnage of the hammer dies, moving in opposite directions, permits precision forming of large forgings. Counterblow hammers with hydraulic drives are particularly well suited to the medium tonnage range. This means there is no need for a complicated compressed ... last changed on: 27.07.2015 Search similar pages
    Servo presses in tie rod design - Technology
    Range of application manufacturing of stamped and formed parts for a wide range of industries Bed dimensions (l x w) 4,000 x 1,600 mm to 7,000 x 2,500 mm, depending on press model Press force 6,300 kN, 8,000 kN, 10,000 kN, 11,000 kN, 12,500 kN, 16,000 kN, 20,000 kN, 25,000 kN, 32,000 kN Drive eccentric drive with highly dynamic torque motors Material feeding with coil feeding line or blankloader ... last changed on: 15.04.2014 Search similar pages
    Page« Back12345678910Forward »