Press
21/07/2010
Beverage cans, screws and railway wheels: products produced on Schuler presses are all around us
Not only for the automotive industry is Schuler an important system partner. In many other industries there are Schuler lines in the stamping plants.
Not only for the automotive industry is Schuler an important system partner. In many other industries there are Schuler lines in the stamping plants.
15/07/2010
Capital increase successfully completed
The Board of Management and Supervisory Board of Schuler AG today resolved to increase the company’s capital stock by € 4.55 million, from € 54.6 million at present divided into 21 million no-par-value common bearer shares, to € 59.15 million.
The Board of Management and Supervisory Board of Schuler AG today resolved to increase the company’s capital stock by € 4.55 million, from € 54.6 million at present divided into 21 million no-par-value common bearer shares, to € 59.15 million.
05/07/2010
Beutler Nova customers experience new solutions for increased blanking productivity during “pit stop”
A technical highlight of the in-house fair was Beutler Nova’s new high-speed blanking press. The press was demonstrated to customers in Gettnau under production conditions.
A technical highlight of the in-house fair was Beutler Nova’s new high-speed blanking press. The press was demonstrated to customers in Gettnau under production conditions.
16/06/2010
Schuler Group at the Euroblech 2010: performance leaps in the forming process
Schuler will be demonstrating its wide range of products at the Euroblech fair in Hanover, from October 26 to 30, 2010.
Schuler will be demonstrating its wide range of products at the Euroblech fair in Hanover, from October 26 to 30, 2010.
10/06/2010
Two processes in one go: key economic benefits from integrating downstream processes into forming stage
Schuler is now utlizing the capabilities of its ServoDirect technology to reliably integrate downstream processes, such as welding, into the metalforming stage.
Schuler is now utlizing the capabilities of its ServoDirect technology to reliably integrate downstream processes, such as welding, into the metalforming stage.
01/06/2010
Intelligent combination: Schuler Group’s new servo knuckle-joint combines proven mechanical system with innovative drive
The Schuler Group will be presenting the prototype of the new servo knuckle-joint press at its in-house fair in Netphen/Germany on June 15 and 16, 2010.
The Schuler Group will be presenting the prototype of the new servo knuckle-joint press at its in-house fair in Netphen/Germany on June 15 and 16, 2010.
28/05/2010
Schuler on path to recovery in first half of fiscal year 2009/10
In the second quarter of its fiscal year 2009/10, Schuler was able to continue the recovery started in its first quarter. The press manufacturer has noticed a renewed upward trend in its project business and expects a sustained improvement. Measures already initiated are beginning to take hold. EBIT rose to € 3.0 million in the second quarter of 2009/10 following a loss of € 7.2 million in the first quarter.
In the second quarter of its fiscal year 2009/10, Schuler was able to continue the recovery started in its first quarter. The press manufacturer has noticed a renewed upward trend in its project business and expects a sustained improvement. Measures already initiated are beginning to take hold. EBIT rose to € 3.0 million in the second quarter of 2009/10 following a loss of € 7.2 million in the first quarter.
19/05/2010
Beutler Nova presents new high-speed blanking press at in-house fair
The new line rounds out Beutler Nova’s range of automatic punching machines. Customers can choose from a wide array of products and services for tailored solutions.
The new line rounds out Beutler Nova’s range of automatic punching machines. Customers can choose from a wide array of products and services for tailored solutions.
18/05/2010
Higher productivity in blank production with optimal automation solutions
Leading car manufacturers such as BMW and Audi rely on Schuler’s automation expertise for the production of blanks for body panels and structural parts.
Leading car manufacturers such as BMW and Audi rely on Schuler’s automation expertise for the production of blanks for body panels and structural parts.
11/05/2010
Schuler Group supplies third press to South African conveyor belt manufacturer
The latest project of the Swiss press specialists Beutler Nova - a subsidiary of the Schuler Group - is the delivery of a C-frame press with a press force of 250 metric tons to the company Lorbrand in May 2010.
The latest project of the Swiss press specialists Beutler Nova - a subsidiary of the Schuler Group - is the delivery of a C-frame press with a press force of 250 metric tons to the company Lorbrand in May 2010.
29/04/2010
Chinese automotive industry relying on Schuler Group technology
Schuler’s presence in China with a number of local production and service sites is a major advantage for its customers. It means that Schuler can ensure extensive support and service for customers even after production launch.
Schuler’s presence in China with a number of local production and service sites is a major advantage for its customers. It means that Schuler can ensure extensive support and service for customers even after production launch.
13/04/2010
Controlled speed, high quality: Schuler Group supplies new screw press for aluminum forging
Umformtechnik Radebeul GmbH awarded the press experts a further order for a new 1,200-ton screw press. With its special equipment, the new press will ensure a consistently high quality standard in future for forged aluminum parts.
Umformtechnik Radebeul GmbH awarded the press experts a further order for a new 1,200-ton screw press. With its special equipment, the new press will ensure a consistently high quality standard in future for forged aluminum parts.
23/03/2010
Systems for manufacturing CNG tanks for natural gas vehicles
Since the first order in 2005, four complete systems for the manufacturing of CNG cylinders, including dies and automation equipment, have been supplied by Schuler’s Waghaeusel facility following successful die testing.
Since the first order in 2005, four complete systems for the manufacturing of CNG cylinders, including dies and automation equipment, have been supplied by Schuler’s Waghaeusel facility following successful die testing.
09/03/2010
Finished railway wheel in one step: Schuler installs Dishing Press in Spain
At CAF’s facility in Beasain, Spain, production was recently launched on a 5,000-ton dishing press from Schuler SMG for the piercing and dishing of railway wheels. The press closes the last gap in a now fully automated and highly modern production process.
At CAF’s facility in Beasain, Spain, production was recently launched on a 5,000-ton dishing press from Schuler SMG for the piercing and dishing of railway wheels. The press closes the last gap in a now fully automated and highly modern production process.
23/02/2010
Logistic challenge: Schuler servo press weighing 64 metric tons delivered through customer’s roof
As early as March 2010, the specialist supplier of safety parts and systems for car manufacturers TRW Automotive will be able to use its new line to produce a wide variety of parts.
As early as March 2010, the specialist supplier of safety parts and systems for car manufacturers TRW Automotive will be able to use its new line to produce a wide variety of parts.
16/02/2010
New orders more stable in first quarter
New orders amount to € 151.7 million - Sales in Q1 2009/10 reach € 146.8 million - Order backlog worth € 512.1 million
New orders amount to € 151.7 million - Sales in Q1 2009/10 reach € 146.8 million - Order backlog worth € 512.1 million
28/01/2010
Renewable energy sources – Schuler AG developing own wind turbines
Schuler AG is entering the wind turbine market. Its aim is to develop and produce complete wind power plants for inland operation, initially for the German market.
Schuler AG is entering the wind turbine market. Its aim is to develop and produce complete wind power plants for inland operation, initially for the German market.
28/01/2010
Schuler slightly more optimistic about 2010
CEO Juergen Tonn: “Turned the corner” - More stable development in Q1 2009/10 - Finance prolonged until September 2012 - New business with wind turbines: prototype under construction
CEO Juergen Tonn: “Turned the corner” - More stable development in Q1 2009/10 - Finance prolonged until September 2012 - New business with wind turbines: prototype under construction
27/01/2010
Cupping press systems from a single source: Schuler supplies one-stop solutions for the beverage can industry
Schuler now offers beverage can manufacturers complete cupping press systems from a single source – including decoilers, feed units, lubrication units and cupping diesets.
Schuler now offers beverage can manufacturers complete cupping press systems from a single source – including decoilers, feed units, lubrication units and cupping diesets.
15/12/2009
Key to reduced emissions: Schuler supplies modern production line for new ZF high-performance gearbox
The completely automated line consists of a hydraulic cutting press supplied by Schuler as well as a mechanical knuckle-joint press from Gräbener Pressensysteme, a subsidiary of the Schuler Group. The knuckle-joint press also includes a coil line supplied by Schuler Automation and an integrated 3D transfer system.
The completely automated line consists of a hydraulic cutting press supplied by Schuler as well as a mechanical knuckle-joint press from Gräbener Pressensysteme, a subsidiary of the Schuler Group. The knuckle-joint press also includes a coil line supplied by Schuler Automation and an integrated 3D transfer system.
Contact
Tobias
Apfel
Head of Corporate Communications & Investor Relations
Tel.: + 49 (0) 71 61 66-829
Get in contact
Head of Corporate Communications & Investor Relations
Tel.: + 49 (0) 71 61 66-829
Get in contact
To top of page
Print page