Presses for the can/container industry: wide range of parts, superior part quality

For the can/container industry Schuler offers two press lines for the production of impact extruded parts and cups. Impact extrusion presses are ideally suited for the manufacture of cans, tubes and a number of similarly formed industrial components. Cupping presses are used to manufacture 2-part beverage cans, so-called “cups” in the trade.

Impact extrusion press

Cupping press

For details about the lines simply move the cursor to the info icons.

Technical specifications: Impact extrusion press*
Type/Model	X150S	X250S	X400S	X630S	X1.200S
Press capacity [kN]	1.500	2.500	4.000	6.300	12.000
Stroke** [mm]	330	350	380	550	600
Strokes** [min.]	220	210	200	60	50
Max. force travel stroke [mm]	10	20	15	30	40
Max. part diameter stroke [mm]	45	59	75	90	125
Max. impact extrusion stroke length** [mm]	230	250	280	400	465
All data apply for AL 99,5; wall thickness 0,3mm * Other strokes and stroke rates on request

Technical specifications: Cupping press
Press capacity	1400 kN/154 US tons
Slide force, outer	700 kN/72 US tons
Slide force, inner	700 kN/72 US tons
Stroke height, outer slide	50,8 mm/2"
Manual adjustment, outer slide	50 mm/1,96"
Stroke height, inner slide	127 mm/5"
Manual adjustment, inner slide	50 mm/1,96"
Phase inversion	60°
SPM	100-250/min.
Closing height, Outer slide	560 mm/22,04"
Closing height, Inner slide	720 mm/28,34"
Die bolster plate, width	2140 mm/84,25"
Die bolster plate, length	1120 mm/44,09"
Outer slide, width	2135 mm/84,05"
Outer slide, length	915 mm/36,02"
Inner slide, width	1500 mm/59,05"
Inner slide, length	430 mm/16,92"